Look after your timber.

How to apply board butter

1. Make sure your board is clean and completely dry.
2. Apply a small amount of board butter using a clean, lint-free cloth.
3. Rub it evenly into the timber. Don’t forget the edges and underside.
4. Leave it for at least 2–4 hours, or overnight.
5. Wipe away any excess and buff with a clean, dry cloth.

When to apply

Condition your board around once a month, or whenever the timber starts to look dry or pale. New boards and boards that are used and washed frequently may need conditioning more often.

Revive a well-loved board

If your board looks dry or dull, clean it, allow it to dry completely, then apply board butter. Leave it overnight before wiping away the excess and buffing.

For light scratches or a rough timber surface:

1. Lightly sand with 180-grit sandpaper, following the grain where visible.
2. Finish with 240-grit sandpaper for a smoother surface.
3. Remove all sanding dust with a clean, slightly damp cloth.
4. Allow the board to dry completely.
5. Apply board butter to all timber surfaces and leave it overnight.
6. Wipe away any excess and buff with a clean cloth.

For boards with engraving, resin or painted details, get in touch before sanding so we can advise on the best way to refresh your piece.

Everyday care

Wash by hand with warm, soapy water, then towel dry and stand upright so air can circulate around both sides.

Never put your timber board in the dishwasher or leave it soaking in water. Keep it away from direct heat and prolonged sunlight.